Android How To's ROM What's Hot

How to Unbrick Samsung Galaxy J2

How to Unbrick Samsung Galaxy J2

How to Unbrick Samsung Galaxy J2

Welcome to the guide in which I will teach you How to Unbrick Samsung Galaxy J2.So today we are here with a method to Flash Stock ROM on Samsung Galaxy J2.

How to Unbrick Samsung Galaxy J2

Samsung Galaxy J2 was launched in September 2015.Samsung Galaxy J2 has a 4.7 inches display with a resolution of 540 x 960 pixels at 234 PPI(Pixels Per Inch).Samsung Galaxy J2 runs on Exynos 3475 Quad which is an octa-core CPU clocked at 1.3 GHz.Samsung Galaxy J2 has a 5MP(Mega Pixel)Back camera with f/2.2 aperture and 2MP(Mega Pixel)front camera with f/2.2 aperture.Samsung Galaxy J2 has a 2000 mAH battery.Samsung Galaxy J2 comes with 8GB of internal memory and 1GB of RAM.

What is Brick?

If your Samsung Galaxy J2 is stuck at the boot logo while you were trying to unlock the bootloader or root your Samsung Galaxy J2 or flash any custom ROM then this is called A Soft Brick.

Let’s start with the guide to Unbrick Samsung Galaxy J2 very easily and safely.Before we start with our guide on How to Unbrick Samsung J2, there are some pre-requirements that are needed to be taken care of.

Flash Stock ROM on Samsung Galaxy J2

Pre-Requirements

  • You should have correct ADB and USB drivers installed on your PC.
  • Your Samsung Galaxy J2’s Bootloader should be unlocked.
  • Your phone should be charged more than 60%.
  • Don’t this method to unbrick any other phone as this method is only to Unbrick Samsung Galaxy J2.
  • Follow the steps properly to Unbrick Samsung Galaxy J2.
Also Read  How to get Features like Android Oreo on any device

Download

ODIN Tool – Download

Samsung Drivers – Download

Samsung Galaxy J2 SM-J200F (Stock ROM) – Download

Samsung Galaxy J2 SM-J200H (Stock ROM) – Download

Samsung Galaxy J2 SM-J200G (Stock ROM) – Download

Samsung Galaxy J2 SM-J200M (Stock ROM) – Download

Unbrick Samsung Galaxy J2 SM-J200F/SM-J200H/SM-J200G/SM-J200M

Step 1: First You have to install the correct Stock ROM of Your Samsung Galaxy J2, for finding the correct Stock ROM you have download the stock ROM with your model number.For seeing the model Number you have to go to Settings then About Phone and then there you will see your Samsung Galaxy J2’s Model Number.(Download The stock ROM on your PC).

Step 2: You have to now download the Latest ODIN Tool from the link given above and extract it on the desktop.

Step 3: Now you have to download Samsung USB drivers from the link give Above and extract it on the desktop.

Step 4: Now you have to turn off your Samsung Galaxy J2.

Step  5: Now you to press and hold the Power Button + Volume Down Button + Home Button.

Step 6: Now will see a message pop-up,  then press Volume Up button to enter download mode.

Step 7: Now you have to connect your Samsung Galaxy J2 to your Pc through Data Cable.

Step 8: Now you have to open Odin.exe from the Odin Tool’s extracted folder.

Step 9: If all the drivers are installed properly then you will see a blue box on the ODIN software if it doesn’t appear then you have to reinstall the Drivers on your PC.

Also Read  How to Download and Install Android Oreo on Mi 5

Step 10: Now you have to click on the AP button and load the Stock ROM you downloaded which should be in .tar.md5 format.

Step 11: Now you have to click on start to start the process to Flash Stock ROM on Samsung Galaxy J2.

Step 12: Now once the flashing is done, you will see a pass message.

Step 13: Now your Samsung Galaxy J2 will reboot automatically and now you can disconnect your phone from your PC.

Step 14: That’s it!!We have successfully completed the guide to Unbrick Samsung Galaxy J2.

I hope you’ve liked our guide on How to Unbrick Samsung Galaxy J2, and if you have any doubts just comment below.

About the author

Aashish Choudhary

Leave a Comment