Android How To's ROM

How to Unbrick Samsung Galaxy J7

Unbrick Samsung Galaxy J7

How to Unbrick Samsung Galaxy J7

Welcome to this guide in which I will teach you How to Unbrick Samsung Galaxy J7.So today we are sharing the method to Flash Stock ROM on Samsung Galaxy J7.


Unbrick Samsung Galaxy J7

Samsung Galaxy J7 was launched in July 2017.Samsung Galaxy J7 has 5.5 inches display with a resolution of 1080 x 1920 pixels at 401 PPI(Pixels Per Inch).Samsung Galaxy J7 runs on Exynos 7870 Octa which is an OctaCore CPU clocked at 1.6 GHz.It has a 3600 mAH battery.Samsung Galaxy J7 has a 13MP(Mega Pixel) back camera with f/1.7 aperture and a 13MP(Mega Pixel)front camera with f/1.9 aperture.It has 16 GB of Internal memory and 3GB of RAM.

What is Brick?

If your Samsung Galaxy J7 is stuck on boot logo while you were trying to unlock bootloader or Root your Samsung Galaxy J7 or Flash any custom ROM then this is called Soft Brick.

Let’s start with a guide to Unbrick Samsung Galaxy J7 easily and safely.Before we start with our guide How to Unbrick Samsung Galaxy J2 there are some Pre-requirements to be taken care of.


  • You should have correct ADB  and USB drivers installed on your Pc.
  • Your’s Samsung Galaxy J7’s bootloader should be unlocked.
  • Your Phone should be charged more than 60%.
  • Don’t try this method on any other to unbrick it as this method is only for Samsung Galaxy J7
  • Follow the steps properly to Unbrick Samsung Galaxy J7.
Also Read  How to get Features like Android Oreo on any device


ODIN Tool – Download

Samsung Drivers – Download 

Samsung Galaxy J7 SM-J700F firmware – Download

Unbrick Samsung Galaxy J7 SM-J700F

Step 1: First of all download correct for your Samsung Galaxy J7 mode, Odin zip file and Samsung USB drivers from the links given above.For finding model number You have to go to settings then About phone then Model Number.

Step 2: Extract all the zip files on your desktop.

Step 3: Now turn off of your Samsung Galaxy J7

Step 4: Now press and hold the Power button + Volume down button + Home Button.

Step 5: Now you will see a pop-up message, then press Volume Up to enter the download mode.

Step 6: Now connect your Samsung Galaxy J7 to your pc through Data cable.

Step 7: Now open the file Odin.exe.

Step 8: If all the drivers are installed properly then you will see a  blue box on the Odin software.If it doesn’t appear then reinstall the drivers. 

Step 9: Now click on the AP button and load the firmware file which should be in the .tar.md5 Format.

Step 10: Now you have to click on Start to start the process of flashing the stock firmware.

Step 11: Now once the flashing is done you will see a pass message.

Step 12: Now your Samsung Galaxy J7 will restart automatically and now you can disconnect your Samsung Galaxy J7 from your PC.

Step 13: Yehhh!! We are successfully done with to unbrick Samsung Galaxy J7.

I hope you liked our guide and If you have any doubts related to unbrick Samsung Galaxy J7 then you can just comment below.

Also Read  How to Unbrick Samsung Galaxy J2

About the author

Aashish Choudhary

Leave a Comment